LANDU Standard Resin 1KG 405nm UV Resin for 3D Printers

Q: Why did my print fail, sticking to the FEP/nFEP film instead of the build plate?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"This is usually caused by insufficient bottom exposure time or an unlevel build plate. For LANDU Standard Resin, try increasing your bottom exposure time by 5–10 seconds, ensure your build plate is properly leveled, and check that the print is adequately hollowed with proper suction-relieving holes."}]}]}

Q: What solvent should I use to clean my printed parts?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"You should use 95% or higher concentration Isopropyl Alcohol (IPA) or specialized resin cleaner. Submerge the printed model in the solvent for a few minutes and gently scrub with a soft brush to remove uncured liquid resin. Do not wash directly under running tap water unless using a dedicated water-washable resin."}]}]}

Q: How long should I cure the model under UV light after cleaning?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"After washing and completely drying the model, cure it under a 405nm UV curing light for 2 to 5 minutes (depending on the size and wall thickness of the model). Avoid over-curing, as excessive UV exposure can make standard resin overly brittle and prone to yellowing."}]}]}

Q: Can I use LANDU Standard Resin for functional or load-bearing mechanical parts?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"No. Standard resin offers a balanced performance with a Shore hardness of 86D and tensile strength of 46 MPa, making it fantastic for miniatures and display figures. However, it is relatively rigid and can be brittle under sudden impact or high mechanical stress. For functional mechanical parts, specialized tough or ABS-like resins are recommended."}]}]}

Q: How should I safely store unused resin and dispose of waste?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Store unused resin in its original bottle, tightly sealed, in a cool, dark, and well-ventilated place away from direct sunlight (ideally between 15–25°C). Never pour liquid resin down the drain. Always cure waste resin (including paper towels and rinse water containing resin residue) completely under sunlight or a UV lamp before disposing of it safely in accordance with local regulations."}]}]}

$24.99 USD

Buy 2 Get 5% OFF | Code: LANDU10

Copy

Capacity

1000 ml 2000 ml

Fast Shipping

15-Day Return

Secure Checkout

Why choose LANDU Standard Resin 1KG 405nm UV Resin for 3D Printers?

High Detail Accuracy (Reproduces fine details, sharp edges, and complex textures with excellent precision for miniature models and detailed figures)
Smooth Surface Finish (Produces smooth printed surfaces with clear contours, reducing the need for extensive post-processing)
Cost-Effective Resin Solution (An economical choice for daily printing, learning, prototyping, and batch production)

Why did my print fail, sticking to the FEP/nFEP film instead of the build plate?

This is usually caused by insufficient bottom exposure time or an unlevel build plate. For LANDU Standard Resin, try increasing your bottom exposure time by 5–10 seconds, ensure your build plate is properly leveled, and check that the print is adequately hollowed with proper suction-relieving holes.

What solvent should I use to clean my printed parts?

You should use 95% or higher concentration Isopropyl Alcohol (IPA) or specialized resin cleaner. Submerge the printed model in the solvent for a few minutes and gently scrub with a soft brush to remove uncured liquid resin. Do not wash directly under running tap water unless using a dedicated water-washable resin.

How long should I cure the model under UV light after cleaning?

After washing and completely drying the model, cure it under a 405nm UV curing light for 2 to 5 minutes (depending on the size and wall thickness of the model). Avoid over-curing, as excessive UV exposure can make standard resin overly brittle and prone to yellowing.

Can I use LANDU Standard Resin for functional or load-bearing mechanical parts?

No. Standard resin offers a balanced performance with a Shore hardness of 86D and tensile strength of 46 MPa, making it fantastic for miniatures and display figures. However, it is relatively rigid and can be brittle under sudden impact or high mechanical stress. For functional mechanical parts, specialized tough or ABS-like resins are recommended.

How should I safely store unused resin and dispose of waste?

Store unused resin in its original bottle, tightly sealed, in a cool, dark, and well-ventilated place away from direct sunlight (ideally between 15–25°C). Never pour liquid resin down the drain. Always cure waste resin (including paper towels and rinse water containing resin residue) completely under sunlight or a UV lamp before disposing of it safely in accordance with local regulations.

Product introduction

LANDU Standard Resin is an affordable and reliable 405nm photopolymer resin designed for LCD, MSLA, and DLP 3D printers. With excellent dimensional stability, smooth surface quality, and accurate detail reproduction, it is ideal for beginners, makers, and designers creating miniature models, anime figures, prototypes, and display pieces. Available in 1KG and 2KG options with multiple color choices, this standard resin provides a balanced combination of print quality, ease of use, and cost efficiency for everyday resin 3D printing.

Key Features

High Detail Accuracy
Reproduces fine details, sharp edges, and complex textures with excellent precision, making it suitable for miniature models and detailed figures.
Smooth Surface Finish
Produces smooth printed surfaces with clear contours, reducing the need for extensive post-processing.
Balanced Mechanical Performance
Provides a practical balance between hardness, rigidity, and toughness for everyday resin printing applications.
Easy Printing Experience
Designed with stable printing performance and good tolerance to exposure settings, helping beginners achieve successful prints.
Cost-Effective Resin Solution
An economical choice for daily printing, learning, prototyping, and batch production.
Wide Printer Compatibility
Compatible with most 405nm LCD, MSLA, and DLP resin 3D printers.

Recommended Applications

Miniature Models
Perfect for:

Tabletop figures
Character models
Small sculptures

Anime & Game Figures
Suitable for:

Detailed characters
Collectible models
Display pieces

Product Prototypes
Ideal for:

Appearance verification
Design evaluation
Concept models

Educational Models
Suitable for:

Teaching models
Demonstration objects
Non-load-bearing displays

Material & Properties

Product Type Standard Photopolymer

Material UV Curable Resin

Capacity 1000ml / 2000ml

Compatibility & Usage

Wavelength 405nm

Printer Type LCD / MSLA / DLP

Application Figures / Miniatures

Property	Test Method	Value
Tensile Strength	ASTM D638	46 MPa
Elastic Modulus	ASTM D638	1150 MPa
Elongation at Break	ASTM D638	15%
Bending Strength	ASTM D790	50 MPa
Flexural Modulus	ASTM D790	1600 MPa
Notched Impact	ASTM D256	22 J/m
Shore Hardness	ASTM D2240	86D
Heat Deflection Temperature	ASTM D648	60°C

Language

Country/region

LANDU Standard Resin 1KG 405nm UV Resin for 3D Printers

Key Features

Recommended Applications

Mechanical Properties